Home»Documentation»Mathematics Library User's Guide»Optimization»Linear Programming

## Linear Programming | Extreme Optimization Numerical Libraries for .NET Professional |

The goal of linear programming is to optimize a linear function subject to linear constraints. In its most general form, a linear program is an optimization problem

Maximize |
Σ c |
---|---|

subject to |
lhs |

l |

A typical linear program can have many thousands of variables and several thousand constraints.

Linear programs use a specialized kind of decision variable, LinearProgramVariable. Since the objective function is linear, it is specified fully by the coefficient of each variable, usually called the cost. It can be set or retrieved through the Cost property.

By convention, linear program variables have a lower bound of zero by default.

Linear programs may have variables that are restricted to be integers. Integer variables can be created using the model's AddIntegerVariable method. If the variable can only take on the values 0 or 1, the AddBinaryVariable method provides a shortcut. Existing variables can be restricted to integer values by setting the IsInteger property to true.

The LinearConstraint class is used to represent constraints in a linear program. Every constraint must have a unique name, which can be accessed through the Name property.

A constraint is a linear combination of variables that is required to lie between specified boundaries. The
LowerBound and
UpperBound
properties define these boundaries. When a constraint is not bounded from above, its upper bound is Double

Variables and constraints can be accessed through the linear program's Variables and Constraints collections. These collections are indexed by position and by name.

A linear program is represented by the LinearProgram class. There are three ways to construct LinearProgram objects.

The quickest way to define a linear program is by passing the vectors and matrices that appear in the definition above to a constructor. There are three constructors that can be used in this way.

The first constructor takes three arguments. It defines a linear program in standard form. This is a linear
program where variables are constrained to be positive, and all constraints are inequalities with an upper bound. The
first parameter is a Vector

s.t. | x |

5x |

Vector<double> c = Vector.Create(1.0, 1.0); Matrix<double> A = Matrix.Create(2, 2, new double[] { 1.0, 5.0, 2.0, 3.0 }, MatrixElementOrder.RowMajor); Vector<double> b = Vector.Create(5.0, 11.0); LinearProgram lp1 = new LinearProgram(c, A, b);

The second constructor adds a fourth parameter. If present, this parameter indicates the number of equality constraints. The equality constraints appear above the inequality constraints.

The third constructor is the most flexible. It has six parameters in all. The first two are once again the cost coefficients and the coefficient matrix. The third and fourth parameters are vectors that contain the lower and upper bounds of the constraints. Each type of constraint can be expressed using a lower and upper bound, as shown in the table below.

Constraint | Lower bound | Upper bound |
---|---|---|

c ≤ rhs | -infinity | rhs |

c ≥ rhs | rhs | +infinity |

c = rhs | rhs | rhs |

lhs ≤ c ≤ rhs | lhs | rhs |

The fifth and sixth parameters are vectors that contain the lower and upper bound for the variables. The different types of constraints on variables can be expressed the same way as for constraints. The following code sample builds the following linear program:

s.t. |
0.5 ≤ x |

0 ≤ x | |

0 ≤ x |

Vector<double> c = Vector.Create(-1.0, -3.0); Matrix<double> A = Matrix.Create(1, 2, new double[] { 1.0, 1.0 }, MatrixElementOrder.RowMajor); Vector<double> lc = Vector.Create(0.5); Vector<double> uc = Vector.Create(1.5); Vector<double> lx = Vector.Create(0.0, 0.0); Vector<double> ux = Vector.Create(1.0, 1.0); LinearProgram lp2 = new LinearProgram(c, A, lc, uc, lx, ux);

The LinearProgram class also has a default constructor that creates an empty linear program. You can then call the linear program's AddVariable and AddLinearConstraint methods.

The AddVariable method has two overloads. The first takes two arguments. The first is the name of the variable. The second is the cost associated with the variable. The second overload has two additional parameters that specify the lower and upper bound of the variable. If no values are specified, a lower bound of zero and an upper bound of infinity are assumed.

The AddLinearConstraint method has
four overloads. The first takes four parameters. The first is the name of the constraint. The second is a Vector

Value | Description |
---|---|

Equal | c = rhs |

GreaterThanOrEqual | c ≥ rhs |

LessThanOrEqual | c ≤ rhs |

The second overload also takes four parameters. The first two are the same as before. The third and fourth parameters are the lower and upper bound of the constraint. The different types of constraints can be specified according to the examples in Table 1.

The third and fourth overloads are similar to the first two. The only difference is that the coefficients are specified using a Double array instead of a vector.

The following example creates a linear program that is identical to the last example:

LinearProgram lp3 = new LinearProgram(c, A, lc, uc, lx, ux); lp3.AddVariable("X1", -1, 0.0, 1.0); lp3.AddVariable("X2", -3, 0.0, 1.0); lp3.AddLinearConstraint("C1", new double[] { 1.0, 1.0 }, 0.5, 1.5);

Although not strictly necessary, it is advisable to create the variables first, followed by the constraints. If the vector containing the coefficients for a constraint is longer than the number of variables that have been defined, additional variables are added automatically. The kth variable is given the name x<g>.

Whenever possible, constraints on variables should be preferred over explicit linear program constraints. The time to solve a linear program depends most heavily on the number of constraints.

Use the MpsReader class to read a LinearProgram from a file in MPS format. The format was named after an early linear programming system from IBM. It has since become a de facto standard for defining linear programs in text format in commercial linear programming systems. There are many online resources that describe the format in detail.

The MpsReader class has one
method, Read, which is overloaded. The first
method takes a string containing the path to an MPS file and returns a LinearProgram object that represents the
linear program in the file. The second method does the same but gets its input from a System.IO

Several extensions of the MPS format have been defined over the years. The current implementation of MpsReader doesn't support these extensions. A
System

Once a linear program has been defined, solving it is very straightforward. The Solve method does all the work.

A variation of the revised dual simplex method is used. Depending on the size of the linear program, this method may take a very long time to complete. Most problems with of the order of hundreds or a few thousand variables and constraints are typically solved in a fraction of a second. Very large problems, with thousands of variables and constraints, may take much longer to solve.
The Solve method
returns a Vector

Value | Description |
---|---|

Unknown | Nothing is known about the solution. This is the status returned before the SolveModel method is called. |

Optimal | The linear program was solved successfully and the solution that was returned is the optimal solution. |

Infeasible | The linear program does not have a solution because some of the constraints conflict with each other. |

Unbounded | The linear program does not have a finite solution. The cost function can be made arbitrarily small. |

Two other status values, Feasible and DualFeasible are used while solving the linear
program. Finally, the OptimalValue property returns the
value of the cost function at the solution. The GetDualSolution method
returns a Vector

The code below solves the linear program defined earlier:

Vector<double> x = lp1.Solve(); Vector<double> y = lp1.GetDualSolution(); Console.WriteLine("Status: {0}", lp1.Status); Console.WriteLine("Primal: {0:F1}", x); Console.WriteLine("Dual: {0:F1}", y); Console.WriteLine("Optimal value: {0:F1}", lp1.OptimalValue);

Copyright © 2004-2023,
Extreme Optimization. All rights reserved.

*Extreme Optimization,* *Complexity made simple*, *M#*, and *M
Sharp* are trademarks of ExoAnalytics Inc.

*Microsoft*, *Visual C#, Visual Basic, Visual Studio*, *Visual
Studio.NET*, and the *Optimized for Visual Studio* logo

are
registered trademarks of Microsoft Corporation.